Versions Compared

Version Old Version 20 New Version 21
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

...

Select the Tool and Type

Tool Line Too Far Up

Problem:

  • The tool line is applied too far up vertically.

Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl).

Resolution:

Image Modified

Tool Line Too Far Down

Problem:

  • The tool line is applied too far down Vertically.

Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl).

Resolution:

Image Modified

See Also: Opening Cuts in the Wrong Place Vertically when not cutting the Outside

Problem:

  • The opening cuts in the wrong place Vertically.

Expand
titleVertical Adjustment Definition

The Vertical Home defines the global vertical placement of objects cut with the blade cartridges.

Resolution:

  • If too far down, increase the Vertical Home.

  • If too far up, decrease the Vertical Home.

  • See Vertical Home for additional information.