Page Comparison

...

Advanced Outside Options
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control. Click the Set Advanced Options button on the Cut Preview screen.
On the Advanced Outside Options screen, set the Cut Mode to Full. The Cut Mode matches the selections from the Outside Cut Options as described above.
The full outside edge of the design or tiled designs will be cut. If you have Remnant Trimming on, it will also cut off the scrap edge.

Defaults: Set the Default for Cutting the Outside

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Modified

Expand

title	Default Setting for the 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Modified

Expand

title	Default Setting for the Default Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Modified

Expand

title	Default Setting for the Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Modified