Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Expand

title	Interior Backup Definition

The Interior Backup controls where the blade plunges into the fallout on interior cuts.

Adjusting the Interior Backup

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Select the desired Cartridge Tab.
Select the desired bevel type from the Current Bevel Type dropdown control.
Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.

Info
The different Bevel Types, including whether it is cutting from the front or the back of the mat, will determine the direction the head travels as it cuts, and dictates whether the corner is a backup or an overcut.

Tip
Outside Outside-Front of Mat

Expand

title	Interior Backup Definition

The Interior Backup controls where the blade plunges into the fallout on interior cuts.

Expand

title	Interior Backup Definition

The Interior Backup controls where the blade plunges into the fallout on interior cuts.