Versions Compared

Version Old Version 17 New Version 18
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Vertical Adjustment for Non-Blade Cartridges Definition

The Vertical Adjustment controls where the Tool
Info
Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl)

 is applied Vertically

.

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Select the Tool and Type

Tool Line Too Far Up

Problem:

  • The tool line is applied too far up vertically.

Expand
titleVertical Adjustment Definition

The The Vertical Adjustment controls specifically where the tool is placed Vertically defines the global vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl).

Resolution:

Info

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

    • Continue making adjustments until the desired outcome is achieved

    • .

    Tool Line Too Far Down

    Problem:

    • The tool line is applied too far down Vertically.

    Expand
    titleVertical Adjustment Definition

    The The Vertical Adjustment controls specifically where the tool is placed Vertically defines the global vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl).

    Resolution:

    Info

    See Also: Opening Cuts in the Wrong Place Vertically when not cutting the Outside

    Problem:

    • The opening cuts in the wrong place Vertically.

    Expand
    titleVertical Home Adjustment Definition

    The The Vertical Home controls specifically where the opening is cut Vertically defines the global vertical placement of objects cut with the blade cartridges.

    Resolution:

    • If too far down, increase the Vertical Home.

    • If too far up, decrease the Vertical Home.

    • See Vertical Home for additional information.