Versions Compared

Old Version 23

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 24

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

...

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

    • Reverse Bevel-Front of Mat

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

    • Reverse Drop-Front of Mat

  • Outside

    • Outside-Front of Mat

    Crease

    Select the Bevel Type for the Exterior Overcut to be Edited:

    Exterior Overcut on Openings

    Problem:

    • The Exterior Overcut on Openings is cut too long or too short.

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.

    Tip

    • Normal Bevel

    • Reverse Bevel

    • Normal Bevel-Front of Mat

    • Reverse Bevel-Front of Mat

    Resolution:

    • If the exterior overcut is too long, decrease the Exterior Overcut.

    • If the exterior overcut is too short, increase the Exterior Overcut.

    • See Exterior Overcut on Openings for additional information.

    Tip

    Exterior Overcut on Drops 

    Problem:

    • The Exterior Overcut on Drops is cut too long or too short.

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.

    Tip

    • Normal Drop

    • Reverse Drop

    • Normal Drop-Front of Mat

    • Reverse Drop-Front of Mat

    Resolution:

    • If the exterior overcut is too long, decrease the Exterior Overcut.

    • If the exterior overcut is too short, increase the Exterior Overcut.

    • See Exterior Overcut on Drops for additional information.

    Tip

    Exterior Overcut on the Outside

    Problem:

    • The Exterior Overcut for Outsides is cut too long or too short.

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.

    Tip

    • Outside

    • Outside-Front of Mat

    Resolution:

    • If the exterior overcut is too long, decrease the Exterior Overcut.

    • If the exterior overcut is too short, increase the Exterior Overcut.

    • See Exterior Overcut on the Outside for additional information.

    Tip

    Exterior Overcut on V-Grooves 

    Problem:

    • The Exterior Overcut for V-Grooves is cut too long or too short.

    Expand
    titleV-Groove Exterior Overcut Definition

    The V-Groove Exterior Overcut controls where the blade retracts from the matboard on exterior cuts on the outside cut of the V-Groove.

    Tip

    • V-Grooves

    Resolution:

    • If the exterior overcut is too long, decrease the Exterior Overcut.

    • If the exterior overcut is too short, increase the Exterior Overcut.

    • See Exterior Overcut on V-Grooves for additional information.

    Tip

    • V-Grooves

    Exterior Overcut on Creases

    Problem:

    The Exterior Overcut on Creases is applied too long or too short.

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.

    Tip

    • Crease

    Resolution:

    • If the exterior overcut is too long, decrease the Exterior Overcut.

    • If the exterior overcut is too short, increase the Exterior Overcut.

    • See Exterior Overcut on Creases for additional information.

    Tip