Versions Compared

Old Version 27

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 28

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

...

Crease Exterior Overcut Too Long

Problem:

  • The Exterior Overcut is applied too long.

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the cartridge retracts from the matboard on exterior cuts.

Resolution:

  • Decrease the Exterior Overcut.

Info

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Crease Exterior Overcut Too Short

Problem:

  • The Exterior Overcut is applied too short.

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the cartridge retracts from the matboard on exterior cuts.

Resolution:

  • Increase the Exterior Overcut.

Info

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.