Versions Compared

Old Version 21

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 22

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

  • Note: Not all cartridges are available for all CMC models.

...

Pen is Applied to the Wrong Place Horizontally 

Problem:

The Pen is Applied to the Wrong Place Horizontally.

Expand
titleHorizontal Adjustment Definition

The Horizontal Adjustment controls where the Deboss is placed Horizontally.

Resolution:

  • If too far left, increase the Pen Horizontal Adjustment.

  • If too far right, decrease the Pen Horizontal Adjustment.

  • See Pen Horizontal Adjustment for additional information.

Pen is Applied to the Wrong Place Vertically 

Problem:

  • The Pen is Applied to the Wrong Place Vertically.

Expand
titleVertical Adjustment Definition

The Vertical Adjustment controls specifically where the Deboss is placed Vertically.

Resolution:

  • If too far down, increase the Pen Vertical Adjustment.

  • If too far up, decrease the Pen Vertical Adjustment.

  • See Pen Vertical Adjustment for additional information.

Pen is the Wrong Size

Problem:

  • The Pen is the Wrong Size.

Expand
titleOpening Adjustment Definition

The Opening Adjustment controls the size of the opening.

Resolution:

  • If cut too small, increase the Pen Opening Adjustment.

  • If cut too large, decrease the Pen Opening Adjustment.

  • See Pen Opening Adjustment for additional information.

Pen Applied at the Wrong Depth

Problem:

  • The Pen is Applied at the Wrong Depth.

Expand
titleDepth Setting Definition

The Depth Setting calculates the proper Blade Depth.

Resolution:

  • Cut too shallow, increase the Pen Depth Settings.

  • Cut too deep, decrease the Pen Depth Settings.

  • See Pen Depth Setting for additional information.

Pen Cartridge Tears the Mat

Problem:

  • The Pen Cartridge Tears the Mat.

Expand
titleCorner Pause Definition

The Corner Pause controls the amount of time, in milliseconds, to pause the application of the non-blade tools in the corners to avoid tearing the mat.

Resolution:

Pen Lines are too Long

Problem:

Info

  • The Pen Lines are drawn too Long.

Expand
titleOvershoot Definition

The Overshootcontrols how far past each segment the non-blade tool is applied.

Resolution:

  • Decrease the Pen Overshoot.

  • See Pen Overshoot for additional information.

Pen Lines are too Short 

Problem:

  • The Pen lines are drawn Short.

Expand
titleOvershoot Definition

The Overshootcontrols how far past each segment the non-blade tool is applied.

Resolution:

  • Increase the Pen Overshoot.

  • See Pen Overshoot for additional information.

Set Pen to Plunge Between Pen Line Segments

Problem:

  • Set the Pen to Plunge Between Pen Line Segments.

Expand
titlePlunge Definition

The Plungecontrols whether to Plunge/Unplunge between segments of an object when applying a non-blade tool.

Resolution:

  • Select Plunge to plunge the Pen between Segments.

  • See Plunge for additional information.

Calibrating Different Pens

Problem:

  • How to Calibrate Different Pens.

Expand
titleInstall Pen Definition

The Install Penutility will walk through calibrating for different pens.

Resolution:

  • Use the Install Pen utility to calibrate different pens.

  • See Install Pen for additional information.

...