Versions Compared

Version Old Version 3 New Version 4
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

V-Groove Exterior Overcut Definition

  • The V-Groove Exterior Overcut controls where the blade retracts from the matboard on exterior cuts on the outside cut of the V-Groove.

  • Exterior Cuts cut into the matboard, not the V-Groove fallout.

  • The V-Groove Exterior Overcut field is marked with a Red Arrow.

  • The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.

  • The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard.

Interior Overcut Definition

  • The Interior Overcut controls where the blade retracts from the fallout on interior cuts.

  • Interior Cuts cut into the fallout, not the matboard.

  • The Interior Overcut field is marked with a White Arrow.

V-Groove Interior Overcut Definition

  • The V-Groove Interior Overcut controls where the blade retracts from the fallout on interior cuts on the inside cut of the V-Groove.

  • Interior Cuts cut into the V-Groove fallout, not the matboard.

  • The V-Groove Interior Overcut field is marked with a White Arrow.

  • The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.

  • The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard.

...