Page Comparison

Note: Not all cartridges are available for all CMC models.

• The Exterior Overcut is displayed on the Configuration Map and on the associated field as a red arrow.

• When making adjustmentsTo adjust, click the plusor minus button at the end of the desired /minus on the field about five times.

• Click OK and do another test cut.

• Check the results of the cut and continue Continue making adjustments until the desired outcome is achieved.

• When making adjustmentsTo adjust, click the plusor minus button at the end of the desired /minus on the field about five times.

• Click OK and do another test cut.

• Check the results of the cut and continue Continue making adjustments until the desired outcome is achieved.