Versions Compared

Old Version 16

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 17

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

If a design is too big to cut, the uncuttable region is displayed as a checkerboard pattern along the sides that are too big. 

The Uncuttable Region on Designs That are Too Big

Info
Info

  • Because of the zero waste clamping system on the Z1 and Z(9000z), they will not display an uncuttable region unless the matboard dimensions entered are larger than the machine can physically cut.

Set the Default for Cutting the Outside

Set the default for Cutting the Outside in the Admin > Editor section.

...

Rectangle Outside

Info

  • To cut the outside as a rectangle, unselect Oval Outside.

  • Unselect Oval Outside.

  • The outside of the mat will cut as a rectangle.

info

Frames and Fillets SKUs

Use the Frames and Fillets section to select the SKU of the desired frame.

  • Enter the Number of Frames.

  • Enter the desired SKU Numbers for each frame.  

Info

  • Optionally, click on the SKU Search (magnifying glass) button to open the Frames Fillets and Ready Mades search screen to locate the desired SKU. 

  • If the selected SKU has a thumbnail associated with it, the frame/fillet is displayed around the mat design. 

  • If no thumbnail is available, a gray placeholder the thickness of the moulding is displayed around the matboard.

Use the Mats and Fillets section to select the SKU of the desired mats.

  • Enter the Number of Mats.

  • Enter the desired SKU Numbers for each mat.  

Mats and Fillets

Info
Info

  • Optionally, click on the SKU Search (magnifying glass) button to open the Mats and Fillets search screen to locate the desired SKU. 

  • If the selected SKU has a thumbnail associated with it, the matboard texture or color is displayed on the mat. 

  • If no thumbnail is available, a checkerboard pattern is displayed.

Change the layer order of the currently selected SKUs in either the frame or mat section.

  • Click and hold the mouse on the desired Frame or Mat SKU field.

  • Drag it up or down to switch places with the adjacent SKU field. 

  • The cursor will display a small arrow and rectangle as you move the fields.  

  • The SKUs entered will change places. 

Change Frame or Mat Layer Order

Info

Add any desired notes you wish to save with the project in the Additional Info field.

 

Additional Info

Info

...