Page Comparison

Aligning Openings
Aligning Openings shows the different ways to align openings in the Nesting software.

Alignment Lines

You

You will see blue alignment lines display when an opening is aligned with a current opening's edges which makes dragging and dropping a quick and easy way to place openings.

Info
This is similar to the Auto Align Openings in Design and Auto Align Circuits in Trace.

Hold down the CTRL key and click on two or more objects to activate the Alignment Buttons.

Use the Alignment buttons to arrange the position of objects in relation to the bounding rectangle of the selected objects.

Info
These work just like the Alignment Buttons in FrameShop Designer editor.

The Select two or more openings.

Click Align to Left Edge button will align the button.

The selected openings will align to the left-most edge of the selection.

The Select two or more openings.

Click Align to Right Edge button will align the button.

The selected openings will align to the right-most edge of the selection.

The Align

Select two or more openings.

Click Align to Bottom Edge button will align the button.

The selected openings will align to the bottom-most edge of the selection.

The Select two or more openings.

Click Align to Top Edge button will align the button.

The selected openings will align to the top-most edge of the selection.