Content Comparison

The V-Groove width is cut too wide/too thin.

Adjust the V-Groove Width Adjustment.

The Outside V-Groove cuts with Swoopsor Flares.

Adjust the Outside Rotation.

The Inside V-Groove cuts with Swoops or Flares.

Adjust the Inside Rotation on a Non-Oval V-Groove.

The Outside Oval V-Groove cuts with Feathers or Bumps.

Adjust the Outside Oval Rotation on the Outside cut of an Oval V-Groove.

The Inside Oval V-Groove cuts with Feathers or Bumps.

Adjust the Inside Oval Rotation on the Inside cut of an Oval V-Groove.

The Deboss, Pen or Vinyl Tool Objectis applied in the wrong place Horizontally.

Adjust the Horizontal Adjustment for the Deboss, Pen or Vinyl Tool.

The Deboss, Pen or Vinyl Tool Objectis applied in the wrong place Vertically.

Adjust the Vertical Adjustment for the Deboss, Pen or Vinyl Tool.

The Deboss, Pen or Vinyl Tool is applied at the wrong blade depth.

Adjust the optimum Depth Setting for the Deboss, Pen or Vinyl Tool.

The Deboss, Pen or Vinyl Tool is tearing the matboard.

Adjust the amount of time to Pause in the corners for the Deboss, Pen or Vinyl Tool.

The Deboss, Pen or Vinyl Tool line is applied too long/too short.

Adjust the Overshoot for the Deboss, Pen or Vinyl Tool. 

The Deboss, Pen or Vinyl Tool line tears in the corner.

Adjust the Plunge/Unplunge for the Deboss, Pen or Vinyl Tool.

How to calibrate the Pen Tool.

The Install Pen utility is used to calibrate the system for different Pens.