Versions Compared

Old Version 9

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 10

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Bevel Type Examples

The examples below display the different bevel types that can be cut with the bladed cartridges.

Normal Bevel

Info

  • A Normal Bevel opening is cut from the back* of the mat, and displays an exposed bevel in the face of the matboard.

*See Normal Bevel - Front of Mat below for editing configurations when cutting from the front of the mat.

Reverse Bevel

Info

  • A Reverse Bevel opening is cut from the back* of the mat, and does not display an exposed bevel in the face of the matboard.

*See Reverse Bevel - Front of Mat below for editing configurations when cutting from the front of the mat.

Normal Drop

Info

  • A Normal Drop is the fallout that is cut from the back* of the mat, which displays an exposed bevel on the face of the matboard.

  • When cutting an Open V-Groove, the inside cut uses the Normal Drop bevel configuration and the outside cuts with a Normal Bevel configuration.

*See Normal Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

Reverse Drop

Info

  • A Reverse Drop is the fallout that is cut from the back* of the mat, which does not display an exposed bevel on the face of the matboard.

  • When cutting a Reverse Bevel Open V-Groove, the inside cut uses the Reverse Drop bevel configuration and the outside cuts with a Reverse Bevel configuration.

*See Reverse Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

Outside

Info

  • An Outside is the outside cut of the mat that is cut from the back* of the mat, and does not display an exposed bevel on the face of the matboard.

*See Outside - Front of Mat below for editing configurations when cutting from the front of the mat.

Normal Bevel - Front of Mat

Info

  • A Normal Bevel - Front of Mat opening is cut from the front* of the mat, and displays an exposed bevel in the face of the matboard.

*See Normal Bevel above for editing configurations when cutting from the back of the mat.

Reverse Bevel - Front of Mat

Info

  • A Reverse Bevel - Front of Mat opening is cut from the front* of the mat, and does not display an exposed bevel in the face of the matboard. 

*See Reverse Bevel above for editing configurations when cutting from the back of the mat.

Normal Drop - Front of Mat

Info

  • A Normal Drop - Front of Mat is the fallout that is cut from the front* of the mat, which displays an exposed bevel on the face of the matboard.

  • When cutting an Open V-Groove from the front, the inside cut uses the Normal Drop - Front of Mat bevel configuration and the outside cuts with a Normal Bevel - Front of mat configuration.

*See Normal Drop above for editing configurations when cutting from the back of the mat.

Reverse Drop - Front of Mat

Info

  • A Reverse Drop - Front of Mat is the fallout that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

  • When cutting a Reverse Bevel Open V-Groove from the Front, the inside cut uses the Reverse Drop - Front of Mat bevel configuration and the outside cuts with a Reverse Bevel - Front of Mat configuration.

*See Reverse Drop above for editing configurations when cutting from the back of the mat.

Outside - Front of Mat

Info

  • An Outside - Front of Mat is the outside cut of the mat that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

*See Outside above for editing configurations when cutting from the back of the mat.

V-Groove

Info

  • A V-Groove is a thin channel cut into the face of the matboard to reveal the matboard core color. It is cut from the front of the mat, and any other openings on that layer will also be cut from the front.

Cartridge Type Examples

Info