...
Bevel Type Examples | |
---|---|
The examples below display the different bevel types that can be cut with the bladed cartridges.Select
|
Normal Bevel | |
---|---|
A Normal Bevel opening is cut from the back* of the mat, and displays an exposed bevel in the face of the matboard. *See Normal Bevel - Front of Mat below for editing configurations when cutting from the front of the mat. |
Reverse Bevel | |
---|---|
A Reverse Bevel opening is cut from the back* of the mat, and does not display an exposed bevel in the face of the matboard. *See Reverse Bevel - Front of Mat below for editing configurations when cutting from the front of the mat. |
Normal Drop | |
---|---|
A Normal Drop is the fallout that is cut from the back* of the mat, which displays an exposed bevel on the face of the matboard. When cutting an Open V-Groove, the inside cut uses the Normal Drop bevel configuration and the outside cuts with a Normal Bevel configuration. *See Normal Drop - Front of Mat below for editing configurations when cutting from the front of the mat. |
Reverse Drop | |
---|---|
A Reverse Drop is the fallout that is cut from the back* of the mat, which does not display an exposed bevel on the face of the matboard. When cutting a Reverse Bevel Open V-Groove, the inside cut uses the Reverse Drop bevel configuration and the outside cuts with a Reverse Bevel configuration. *See Reverse Drop - Front of Mat below for editing configurations when cutting from the front of the mat. |
Outside | |
---|---|
An Outside is the outside cut of the mat that is cut from the back* of the mat, and does not display an exposed bevel on the face of the matboard. *See Outside - Front of Mat below for editing configurations when cutting from the front of the mat. |
Normal Bevel - Front of Mat | |
---|---|
A Normal Bevel - Front of Mat opening is cut from the front* of the mat, and displays an exposed bevel in the face of the matboard. *See Normal Bevel above for editing configurations when cutting from the back of the mat. |
Reverse Bevel - Front of Mat | |
---|---|
A Reverse Bevel - Front of Mat opening is cut from the front* of the mat, and does not display an exposed bevel in the face of the matboard. *See Reverse Bevel above for editing configurations when cutting from the back of the mat. |
Normal Drop - Front of Mat | |
---|---|
A Normal Drop - Front of Mat is the fallout that is cut from the front* of the mat, which displays an exposed bevel on the face of the matboard. When cutting an Open V-Groove from the front, the inside cut uses the Normal Drop - Front of Mat bevel configuration and the outside cuts with a Normal Bevel - Front of mat configuration. *See Normal Drop above for editing configurations when cutting from the back of the mat. |
Reverse Drop - Front of Mat | |
---|---|
A Reverse Drop - Front of Mat is the fallout that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard. When cutting a Reverse Bevel Open V-Groove from the Front, the inside cut uses the Reverse Drop - Front of Mat bevel configuration and the outside cuts with a Reverse Bevel - Front of Mat configuration. *See Reverse Drop above for editing configurations when cutting from the back of the mat. |
Outside - Front of Mat | |
---|---|
An Outside - Front of Mat is the outside cut of the mat that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard. *See Outside above for editing configurations when cutting from the back of the mat. |
...