Page Comparison

These instructions show how to place a Deboss element into your design.

• The Deboss cartridge presses a stylus onto the surface of the matboard to create the design.  

• Click the Add Other Openings button on the Openings tab.

• Click on the desired Deboss Cartridge Size to place a Deboss object.

• If an object is selected when clicking Add Deboss, the Deboss Offset window will open. 

• Enter the distance away from the current opening to place the Deboss.

• The Deboss is placed.

• Click on the Properties tab to edit the Deboss element if desired.