Page Comparison

...

Crease Exterior Overcut Too Long
This is viewed from the front of the mat. If the The Exterior Overcut retracts the cartridge too late, it makes the exterior overcut is applied too long.
Decrease the Exterior Overcut.
The corners will now meet up properly.	Image Removed
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.
The corners will now meet up properly.	Image Added

Crease Exterior Overcut Too Short
This is viewed from the front of the mat. If the Exterior Overcut retracts the cartridge too soon, it makes the exterior overcut The Exterior Overcut is applied too short.
Increase the Exterior Overcut.
The corners will now meet up properly.	Image Removed
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.	Image Added
The corners will now meet up properly.	Image Modified

Versions Compared