Page Comparison

...

V-Groove Outside has a Swoop
The beginning of the outside cut of the V-Groove Swoops toward the non-oval V-Groove opening.
Decrease the Outside Rotation.	Image Removed
The object will now cut correctly.	Image Removed
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.	Image Added
The object will now cut correctly.	Image Modified

V-Groove Outside has a Flare
The beginning of the outside cut of the V-Groove Flares away from the non-oval V-Groove opening.
Increase the Outside Rotation value.	Image Removed	The object will now cut correctly.	Image Removed When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.	Image Added
The object will now cut correctly.	Image Modified

See Also: V-Groove Inside Rotation
Select this topic to see information on the Inside Rotation (V-Groove) to adjust the rotation for the inside cut of the non-oval V-Groove.

Versions Compared