Page Comparison

The Oval Rotation field controls how much the foot block will rotate before cutting.

Adjust the Oval Rotationif you are getting Bumpsor Featherson an oval opening.

If you have too much rotation on an oval opening, you will get a Feather, too little and you will get a Bump.

• Increase the Oval Rotation if the object has a Bump.

• Decrease the Oval Rotation if the object has a Feather.

• The blade returns to the outside of the starting point of an oval opening, creating a bump in the oval.

• Increase the Oval Rotation.

• The object will now cut correctly.

• When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated.

• Click OK and do a test cut.

• Check the results of the cut and continue making adjustments until the desired outcome is achieved.

• The object will now cut correctly.