Cut the Outside As Designed | |
|---|---|
Select As Designed from the Outside Cut Options dropdown control to cut the outside edges of the design as they were designed on the CMC Z1 and Z (9000z). | |
Select As Designed from the Outside Cut Options dropdown control to cut the outside as originally designed. This can be helpful when coming from Traceor Nesting where you have already determined how you want the outside to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge. | |
Advanced Outside Options | |
|---|---|
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control. Click the Set Advanced Options button on theCut Preview screen. | |
On the Advanced Outside Options screen, set the Cut Mode to As Designed. The Cut Mode matches the selections from the Outside Cut Options as described above. | |
This can be helpful when coming from Trace or Nesting where you had already selected how you want the outside(s) to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge. | |
Defaults: Set the Default for Cutting the | Outside Outside | ||
|---|---|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. | |||
Defaults: Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. | |
Defaults: Set the Default for the Advanced Options | |
|---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. | |
Defaults: Set the Default for the Cut Mode | |
|---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. | |