Cut Pattern: Optimized | |
|---|---|
Set Optimized from the Cut Pattern dropdown control to cut tiled mats bi-directionally, which will zig-zag back and forth when cutting the outside on tiled mats on the CMC Z1 and Z (9000z). | |
Click the Set Advanced Options button to access the Advanced Outside Options. |  |
Select Optimized from the Cut Pattern dropdown control. Click OK. |  |
It will cut the outsides of tiled mats in a bi-directional, zig-zag fashion. |  |
Defaults: Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Defaults: Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |  |
Defaults: Set the Default for the Advanced Options | |
|---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. |  |
Defaults: Set the Default for the Cut Pattern | |
|---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. |  |