Content Comparison

These instructions will show how to select the 90° Blade Cartridge for the outside cut on the CMC Z1 and Z (9000z).  

Select the 90° Blade Cartridge Outside Cut

Bring the project to the Cutting Preview screen. 

Click Set Advanced Options to access the Advanced Outside Options. 

Toggle the Cut Outside Using 90 Degree Tool to On from the Advanced Outside Options screen. 

This will use the 90 Degree Cartridge when cutting the outside.

Select the desired Outside Cut Option from the Advanced Outside Options for cutting the outside of the mat and click OK. 

Select Off to not cut the outside of the mat.

Optionally, select the desired Outside Cut Option for cutting the outside of the mat from the Cut Preview. 

Select Off to not cut the outside of the mat.

Click Cut.

Insert the 90° blade cartridge when prompted.