Content Comparison

Create a 10x10 (25x25 cm) mat with no opening.

Click on the Openings Tab.

Click the Add CutArt Opening button.

On the Load CutArt screen, double-click on the Wedding2 directory to open it.

Click on Heartribbon.wca.

Click OK to place the CutArt on the Editor.

Right-click on the CutArt and select Copy.

Right-click on the Work Space and select Paste.

Paste two more copies of this CutArt onto the work space for a total of four hearts.

Click on the Properties Tab.

Click on the top right CutArt.

Click the Mirror checkbox to flip the CutArt left to right.

Click on the bottom left CutArt.

Click the Mirror checkbox to flip the CutArt left to right.

Click on the bottom left CutArt.

Click on the Advanced Tab.

Click the 180 button under Rotation to rotate the CutArt.

Click on the bottom right CutArt.

Click on the 180 button to rotate the CutArt.

The CutArts are now mirrored and rotated into each corner, so that the top of the CutArt is facing away from the center of the mat.

Click on the desired CutArt on the Editor.

Click on the Properties Tab.

Click on the Cartridge Icon and select the desired Cartridge (52°, Deboss, Pen, etc).

Select the specific cartridge type from the Type field if appropriate (i.e., V-Groove, Deboss cartridge size).
The selected cartridge will be used on this CutArt.