Straight Line Trimmer Installation: Slide on the Straight Line Trimmer | |
|---|---|
NOTE: A Blade has been installed, so take care when handling the Straight Line Trimmer. Look at the backside of the Trimmer and locate the T-Nut on the glides. Make sure that the T-Nut lines up with the glide on both the upper and lower sections of the Trimmer. | |
Holding the Straight Line Trimmer steady (a second person helps here), carefully slide the Trimmer onto the channels on the right side of the Board, making sure that the T-Nuts slide into the channel of both the upper and lower rails. | |
Lock the Straight Line Trimmer in Place | |
|---|---|
Move the Straight Line Trimmer to the right until it stops. | |
Slowly tighten the bottom locking knob COUNTER-CLOCKWISE until it is snug. | |
Slowly tighten the top locking knob CLOCKWISE until it is snug. You will calibrate it after the air lines are hooked up. | |
...