| View file | ||
|---|---|---|
|
Bevel Types that Cut Counter-Clockwise | |
|---|---|
The following bevel types cut clockwise and are displayed viewed from the finished side: | |
Normal Bevel - Front of Mat |  |
Normal Drop |   |
Outside - Front of Mat |   |
Reverse Bevel |  |
Reverse Drop - Front of Mat |  |
Overcut and backup description |  |
...
Rotation | |
|---|---|
Rotation is how much the head rotates before cutting. Rotating the blade a few degrees eliminates curves at the beginning of the cut. This value does not affect circles and ovals. Determine if the problem is a swoop or a flare. | |
If the beginning of the cut swoops in toward the opening, add reduce the rotation. |   |
For swoops, increase decrease the rotation. Increasing Decreasing rotation turns head clockwise. |   |
If the beginning of the cut flares out away from the opening, reduce increase the rotation. |   |
For flares, decrease increase the rotation. Decreasing Increasing rotation turns head counterclockwise. |   |