...
Alignment Buttons | |
|---|---|
The second and third rows of alignment buttons activate when two or more openings are selected. |  |
Design three 2x3 (5x7 cm) openings with an outside of 16x20 (40x50 cm). |   |
Note that these buttons refer to the furthest-most edges of the group of openings. Picture the group as contained within a rectangle. Click on the button that corresponds to the direction desired, and the openings will move within reference to that imaginary rectangle. NOTE: Rectangle highlights are displayed here for reference; they do NOT appear on the screen. Because these buttons deal with openings in relation to each other, click Undo after each example to save time for the next example. |   |
Align Objects to Left Edge: Aligns Objects to Left-Most Opening Edge | |
|---|---|
Lay out the openings as displayed. | |
Select all of the openings and click on Align Objects to Left Edge button. |  |
The openings align to the left-most opening edge. Click Undo. |   |
Align Objects to Center: Aligns Objects to Center (Horizontally) | |
|---|---|
Leave openings selected. | |
Click on Align Objects to Center button. |  |
The openings align to the center horizontally. Click Undo. |   |
Align Objects to Right Edge: Aligns Objects to Right-Most Opening Edge | |
|---|---|
Leave openings selected. | |
Click on Align Objects to Right Edge button. |  |
The openings align to the right-most edge. Click Undo. |   |
Align Objects to Bottom: Aligns Objects to Bottom-Most Opening Edge | |
|---|---|
Leave openings selected. | |
Click on Align Objects to Bottom button. |  |
The openings align to the bottom-most opening edge. Click Undo. |   |
Align Objects to Middle: Aligns Objects to Middle (Vertically) | |
|---|---|
Leave openings selected. | |
Click on Align Objects to Middle button. |  |
The openings align to the middle vertically. Click Undo. |   |
Align Objects to Top: Aligns Objects to Top-Most Opening Edge | |
|---|---|
Leave openings selected. | |
Click on Align Objects to Top button. |  |
The openings align to the topmost edge. Click Undo. |   |
Position (X,Y) | |
|---|---|
Leave openings selected. |   |
Enter 3.5 (9 cm) for X and 2 (5 cm) for Y in the position field. |  |
Openings move as a group to this position in reference to the group handle point. |   |
Single objects can be moved with the X,Y positioning as well. Click on work space to unselect the group. Click on the lower opening. |   |
Enter 1.5 (3.5 cm) for X and 2 (5 cm) for Y to move this opening. |  |
Opening moves to this new position. |   |